Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
5D died with flashing power brick
09-04-2016, 05:50 PM (This post was last modified: 09-04-2016 05:51 PM by carcamerarig.)
Post: #1
5D died with flashing power brick
Hi looking for some advice / support
My 5D died and ejected from Mac, the power brick has a flashing green LED.
I have removed the drives tries the reset button but nothing changed.
Any ideas please? Unit is 4 months out of warranty....

Support ticket number 160904-000009

Many thanks. J
Find all posts by this user
Quote this message in a reply
09-05-2016, 06:33 AM
Post: #2
RE: 5D died with flashing power brick
If the power brick is flashing, sounds like it died. You can find our for sure by using an aftermarket power brick with similar specs and see if it powers up.

Drobo (Gen2)
Drobo 5N
=============================
** Praise the Gods, Do Good, Act Bravely. **
Find all posts by this user
Quote this message in a reply
09-28-2016, 04:36 PM
Post: #3
RE: 5D died with flashing power brick
I would say if the power supply light is flashing green when plugged into the Drobo but solid green when it is unplugged from the Drobo that is a potential indication there is something wrong with the Drobo, not the power supply. You should contact Support and open a case on this issue. This is what I did when I encountered the situation I just described.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump: