Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
3.0.8 Firmware is out.
06-24-2013, 07:15 PM (This post was last modified: 06-24-2013 07:57 PM by masc2279.)
Post: #1
3.0.8 Firmware is out.
Claims to fix the intermittent mSATA Life Reporting section and some usb thunderbolt issues. Lets see what happens.
Well after installing the Drobo Shows my mSATA back to 100 % from 96 % and everything is reporting normally for now.
Find all posts by this user
Quote this message in a reply
06-26-2013, 09:21 AM
Post: #2
RE: 3.0.8 Firmware is out.
Well i did not notice when but a few hours to a few days down the display adjusted back to 96% mSATA Good Condition. So don't know if there is still an issue or the mSATA is going bad and its showing the right status. The percentage is at least not jumping around like it did in the past
Find all posts by this user
Quote this message in a reply
06-27-2013, 07:42 AM
Post: #3
RE: 3.0.8 Firmware is out.
hi masc, it could be like you said...
with the patch fixing the interpretation of the condition %
but with the condition likely to be deteriorating slowly over time as seems to be the case with flash storage/usb sitcks etc

(btw i have XP home SP2, a Drobo v1 with 2x 1TB/2x 1.5TB WD greens, & a bkp Drobo v2 with the same + a DroboShare: unused)
& a DroboS v2 with 3xWD15EADS &2x1TB in DDR mode on win7, & a drobo5D (all usb)
  • btw i did a sustained (write) operation for about 6 hours, and got 13.2MB / sec ...objection? "sustained" :)
    (16.7MB/s on a v2 & 47-96MB/s drobo-s)
Find all posts by this user
Quote this message in a reply
07-02-2013, 01:44 PM
Post: #4
RE: 3.0.8 Firmware is out.
Does 3.0.8 support OSX 10.9?
Find all posts by this user
Quote this message in a reply
07-02-2013, 02:20 PM
Post: #5
RE: 3.0.8 Firmware is out.
(07-02-2013 01:44 PM)jonnikuest Wrote:  Does 3.0.8 support OSX 10.9?
It probably won't be supported until after Apple releases it.

You earn respect by how you live, not by what you demand.
-unknown
Find all posts by this user
Quote this message in a reply
07-02-2013, 05:29 PM
Post: #6
RE: 3.0.8 Firmware is out.
(07-02-2013 01:44 PM)jonnikuest Wrote:  Does 3.0.8 support OSX 10.9?

I am running 10.9 without any issues what so ever.
Find all posts by this user
Quote this message in a reply
07-17-2013, 08:34 PM
Post: #7
RE: 3.0.8 Firmware is out.
Drobo Dashboard says I'm all up to date? Running 3.0.7 and 2.5.2

Any ideas?
Find all posts by this user
Quote this message in a reply
07-18-2013, 10:47 AM
Post: #8
RE: 3.0.8 Firmware is out.
(07-17-2013 08:34 PM)mbezzo Wrote:  Drobo Dashboard says I'm all up to date? Running 3.0.7 and 2.5.2

Any ideas?

Yes 3.0.8 from what i was told would only be a manual update for those with the SSD percentage issue it would not be pushed out.
Find all posts by this user
Quote this message in a reply
07-21-2013, 05:30 PM
Post: #9
RE: 3.0.8 Firmware is out.
Ah, okay. That makes sense - I don't have an SSD in mine.

Thanks!


(07-18-2013 10:47 AM)masc2279 Wrote:  
(07-17-2013 08:34 PM)mbezzo Wrote:  Drobo Dashboard says I'm all up to date? Running 3.0.7 and 2.5.2

Any ideas?

Yes 3.0.8 from what i was told would only be a manual update for those with the SSD percentage issue it would not be pushed out.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump: