Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
All red lights when I upsized a drive
02-07-2017, 12:46 PM
Post: #1
All red lights when I upsized a drive
I had all green and 1 yellow light on my drobo S. I went ahead and replaced the 2TB drive with a 4TB drive and then all my lights went red with one flashing (3TB drive) and said I had removed too many drives and to put them back. I replaced the drive I took out with the original one and they stayed all red and one blinking. I then rebooted my drobo and they were all green and the one I tried replacing went red and continued to tell me to replace the drive. After a few minutes all the lights began blinking green/yellow in data protection mode. I believe it is rebuilding now using the old drive 2TB drive. I am waiting till it is out of data protection mode to try replacing again.

How do I replace the new 4TB drive successfully this next go around without getting the all red lights and too many drives removed issue?

Current Drive Sizes: (1) 4TB, (2) 3TB & (2) 2TB
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
All red lights when I upsized a drive - marisaholmes - 02-07-2017 12:46 PM

Forum Jump: